Search results for "Mining engineering. Metallurgy"
showing 10 items of 38 documents
The Grain Boundary Wetting Phenomena in the Ti-Containing High-Entropy Alloys: A Review
2021
In this review, the phenomenon of grain boundary (GB) wetting by melt is analyzed for multicomponent alloys without principal components (also called high-entropy alloys or HEAs) containing titanium. GB wetting can be complete or partial. In the former case, the liquid phase forms the continuous layers between solid grains and completely separates them. In the latter case of partial GB wetting, the melt forms the chain of droplets in GBs, with certain non-zero contact angles. The GB wetting phenomenon can be observed in HEAs produced by all solidification-based technologies. GB leads to the appearance of novel GB tie lines Twmin and Twmax in the multicomponent HEA phase diagrams. The so-cal…
Study of phase composition, photocatalytic activity, and photoluminescence of TiO2 with Eu additive produced by the extraction-pyrolytic method
2021
The Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2. The work was also partially supported by the LZP grant 2020/2-0074. R. Burve has been supported by the project “Synthesis of nanostructured materials based on titanium dioxide and tin dioxide and investigation of their physicochemical properties” Nr. MP-2019/7, for strengthening scientific personnel capacity 2019/2020 at the Riga Technical University. Authors are grateful to Dr. K. Šmits for the microscopic measurements and SEM images.
Study on Experimental Determination of the Elasticity Modulus of Casted Basalt
2020
Basalt is a material available in big quantities in nature. It has a low price and can be used in various domains. It can be relatively easily extracted from natural deposits and processed by means of melting. Melted and recrystallized basalt has demonstrated promising behavior with regards of its use in manufacturing, as reported in the literature. This paper presents the results of an experimental study on the determination of the modulus of elasticity of molten and recrystallized basalt by the method of resistive electrical tensometry and to validate the result and by simulation using finite elements method. Testing methodology, experimental test, data records, data processing and result…
Cadmium Recovery from Spent Ni-Cd Batteries: A Brief Review
2021
The significant increase in the demand for efficient electric energy storage during the past decade has promoted an increase in the production and use of Cd-containing batteries. On the one hand, the amount of toxic Cd-containing used batteries is growing, while on the other hand, Cd is on a list of critical raw materials (for Europe). Both of these factors call for the development of effective technology for Cd recovery from spent batteries. The present paper is aimed at providing a short review of the recent progress in Cd recovery from spent batteries. Statistical data from the past decade on the source of Cd, its global production, and Ni-Cd battery recycling are given in the introducti…
One-step electrodeposition of superhydrophobic coating on 316L stainless steel
2021
Superhydrophobic coatings were fabricated through a one-step electrochemical process onto the surface of 316L stainless steel samples. The presence of hierarchical structures at micro/nanoscale and manganese stearate into the coatings gave superhydrophobicity to the coating, with contact angle of ~160°, and self-cleaning ability. Corrosion resistance of 316L samples was also assessed also after the electrodeposition process through Electrochemical Impedance Spectra recorded in an aqueous solution mimicking seawater condition.
The Role of Formal Education in Developing Critical Thinking Skills of Engineering Students
2020
The hereby paper intends to acknowledge and discuss the concept of critical thinking and the influence of this ability on engineering students. The purpose of this research is to establish the criteria according to which some students think more critically compared to other students in the same field of study. Logic is a term that seems simple, although very few know how to access that logical part of the human brain. This research has shown that the students’ level of critical thinking is not related to the year of study. Therefore, there are no activities in faculties that have a significant influence on the development of critical thinking. Moreover, it has resulted that female participa…
Development of Removable Visual Impact Indicator or Polymer Composite Materials
2021
The prototype of removable visual impact indicator for thermoset polymer composite materials is developed, and its characteristics are experimentally determined. The indicator is a fabric tape glued by epoxy to the surface of the polymer composite. The tape is impregnated with a composition that provides a visual response at the place of an impact on the composite surface. Ball-drop tests demonstrated the increase of the magnitude of the visual response with the impact energy at different substrate hardnesses. The shelf-life and mode of the tape storage until commissioning are determined. Peel tests showed the ability to remove a used indicator without damaging the surface of the composite.
Thermal Analysis, Mechanical and Rheological Behaviour of Melt Manufactured Polyethylene/Liquid Crystal Polymer Blends
2011
Modification of properties of conventional thermoplastics with thermotropic liquid crystal polymers, from one hand, allows decrease their viscosities, substantially facilitating processing conditions, and, from another hand, allows increase their exploitation properties. Orientation of the labile structure of liquid crystal polymer in extrusion or injection moulding causes specific reinforcement (so-called self-reinforcement) to occur in the blends containing liquid crystal polymer. Up to now the effect of self-reinforcement is mostly investigated in the blends, containing considerable amount of liquid crystal polymer. In this research the effect of minor amounts of liquid crystalline co-po…
A Study of Osmosis Rate Through Several Proton Conducting Polymer Composite Membranes
2021
Carbon dioxide is typically considered to be a byproduct of various industrial processes that should not be released into the environment due to its nature as a harmful greenhouse gas. One of the more promising ways to dispose of it in an economical and environmentally friendly way is by using it as a raw material in electrochemical synthesis reactors. An important part of such reactors is an ion exchange membrane. In this study the influence of ZrO2 content in SPEEK – ZrO2 composite membranes on rate of osmosis trough them was investigated, with the goal of evaluating ZrO2 as an additive for making ion exchange membranes with fine-tuned osmotic permeability.
E-maintenance platform: a business process modelling approach
2014
Las tecnologías de la información y la comunicación (TIC) se utilizan cada vez más en la sociedad y en los negocios. Las TIC se han convertido en un elemento clave para el desarrollo empresarial y la mejora de las actividades en todos los departamentos de una organización. Análogamente, la creciente importancia de los Sistemas de Gestión de Mantenimiento asistido por Ordenador (CMMS), Mantenimiento Basado en la Condición (CBM), y la aplicación de dispositivos remotos y funciones como el e-mantenimiento, han abierto grandes posibilidades para la optimización del mantenimiento. Estas técnicas han dado lugar a la aparición de retos tecnológicos, tales como la interoperabilidad entre diferentes…